 |
 This is a listing of various types documents that Dr. Thornton-Trump has collected over the years. It includes: All documents are currently located in Lab 217 and maybe borrowed on condition that they are returned immediately upon completion of use. If this should be abused, they will cease to be available. Documents will be continuously added as they are generated. |
| Ph.D. Thesises |
• Self-Adjoint and Non Self-Adjoint Spinning Timoshenko Beam Systems (1992) J. Zu • The Technical Aspects of the Safety of Motor Vehicles (1967) H. Hurt Jr. |
| Masters of Science Thesis |
• A Preliminary Assessment of Four Geometrics of Workstations for Printed Circuit Board Assembly (1996) A. Kaushik • Free Vibration of an Axially Non-Uniform Flexible Cylindrical Tank Partially Filled with Fluid (1992) Jeff Daochuan Liu • Granular Pesticide Distribution Pattern from a Helicopter-Borne Spreader (1997) M. Ghimire • Non-Intrusive Knock Detection in a Turbocharged, Dual Fuel Engine (1997) Stefan Roberts • Small Business Modelling Within The Financial Accounting Conceptual Framework (1999) W. Fu • Support of Guyed Transmission Tower Using Self-Adjusting Sprung Guy Wires (1998) Grant Johnston • The Use of Zeta Bankruptcy Analysis in a Simulation Model to Study the Economic Benefits of Computer Integrated Manufacturing (1987) Emil Yu • Wind Driven Instability of Tractor-Trailer Combinations (1989) Jake Kosior |
| Bachelor of Science Thesis |
• A Spinal Architecture for Machines that Walk (1993) Issac Gesser • Active Suspension Design for Buses (1992) Grant Johnston • Analysis of Positional Error in the Velocity Control Linkage of the New Holland TV-140 Bi-Directional Tractor (1998) J. Sparling • Boundary Element Analysis for Stress with Graphics Interface (1991) Mark Tacchi • Boundary Element Stress Analysis of Spur Gears (1986) J.D. Norrie • Computer Control with an IBM-XT (1989) Gordon Sims • Design of a Flechette Release Mecahnism for a General Purpose Missile (1993) Wayne Dang & Glenn Westlunch • Design of a Retractable Boom System for Non-Spinning Rocket Payloads (1991) James Gaerke • Design of a Torque Measurement Instrument to Measure Performance of Scaphoid Bone Screws (1991) Kurt Ising • Development of a General Tool for the Automated Derivation of the Dynamic Equations of Motion for Multi-link, Multi-DOF Robotic Systems (1995) R. Boyko • Dynamic Simulation of a Normal Human Gait (1992) Koji Suzuki • Mechanical Properties of Non-Linear Elastic Membranes (1981) James Klymchuk • Raker-Vac Combination (Selt-Propelled/Walk Behind) (1998) Paul Ducharme • Relationship Between Forces Exerted on Biceps Brachii and EMB Signals (1995) V. Mak • Slack Wire Strike Protection (1991) Scott Saxberg • Symmetry Indices of Gait Analysis (1982) R.J. Pietrus • The Design of a Geriatric Seating System (1992) Doug McKibbin • The Translation of a Dynamic Simulation Model from DYNAMO II to Professional DYNAMO Plus (1991) S.G. Nikel • Three-Dimensional Motion Analysis Using a Peaks Video System (1993) Laura-Lee St-Vincent • Trend Monitoring Based on the Use of a Heads Up Display (1997) R. Weiser |
| SAE: B.Sc. Thesises, Reports & Manuals (in Eng. Library) |
• 1995 SAE Aero Cargo Design Report (1995) L. Auriti, J. Person, S. Thomas, & S. Trask • 1996-1997 FSAE Cost Analysis Report (1997) • 1997-1998 FSAE Cost Analysis Report (1998) • 1998-1999 FSAE Cost Analysis Report (1999) • 1997-1998 FSAE Rules (1998) • A Design Analysis of the Supension System for SAE Mini Baja Off-Road Vehicles (1995) Dennis Wong • A Guide for Writing an Engineering Design Report (1994) Dr. J. Shewchuk • Design of an Aircraft Control Mechanism (1998) S. Basarab, M. Hudek, R. Jensen, J. Rempel • An Evaluation of a Modified K-Cycle Output Cam (1995) J. Paulmark • Cold Start Exhaust Emissions Modelling by Numerical Integration (1994) D. Toms • Combustion Chamber Design for Improved Combustion Effiency in a Four Cycle I.C. Engine (1993) D. Paziuk • Design and Benchmarking a SMV Control System (1993) Andre Pelletier • Design and Construction of an Aerodynamic Airfoil for the SAE Forumla Car (1998) D. Balli • Design and Construction of a Composite Wing for the 1997 SAE Aero Design Cargo Plane (1997) J. Person, D. Rempel • Design and Implementation of Shifter and Clutch Mechanisms for the FSAE Car (1997) S. Bailey • Design and Implementation of the Steering System for the U of M Formula SAE Car (1997) Brett Mckay • Design for Front Spindles for the Formula SAE Car (1998) P. Auger & Ryan Dupuis • Design of a Braking System for SAE Formula Car D. Toms • Design of of Front Brake Calipers and Discs for the Formula Car (1998) S. Koeuth, C. Wu, L. Teng, C. Mok • Design of a 2HP Engine Dynamometer (1997) D. Carriere • Design of a Differential for the Mini-Baja Vehicle (1998) Regan Morrison • Design of a Mechanical Clutch for the SAE Mini Baja Vehicle (1998) A. Pauch & M. Coss • Design of a Limited-Slip Differential for the SAE Mini Baja Vehicle (1998) M. Enns & T. Kaszuba • Design of a Rear Disk Braking System for the SAE Forumla Car (1998) C. Comeault, A. Dereniwksy, A. Fanai, J. Vijayen • Design of a SuperMileage Vehicle Engine (1993) J. Penner • Design of a Two Stroke Model Aircraft Engine (1998) I. Harder • Design of an Alternate Drivetrain for the SAE Mini-Baja Vehicle (1998) D. Goda, R. LeGall, N. Morozumi • Design of an Econo-Lux Traler for Transport of UM Competition Vehicles (1998) R. Tetrault, N. Mann, N. Cindric, E. Svendsen • Design of the 1998 UMSAE Composite Aero Design Plane P. Harrison, R. Bettig • Design of the Balsa Cargo Aircraft The "PRARIE FIRE II" Report (1998) UMSAE • Design of the Composite Cargo Aircraft The "SPRUCE MOOSE" Report (1998) UMSAE • Design of the Frame and Body of a Mini Baja Vehicle (1996) M. Coss, B. Reimer, & C. Riddell • Design of the Rear Spindle for the Formula SAE Vehicle (1997) G. Despins, I. Maclean, S. Mann, R. Chan • Design of the Steering for the SAE Formula One Vehicle (1995) L. Auriti, J. Person, S. Thomas, & S. Trask • Design of Spindles for the Formula One Car (1997) P. Auger, R. Dupis, B. Jose, T. Kaszuba, & J. Koehler • Dynamic Analysis of Structural Members (1996) M. Dowhopoluk & C. Zubin • ECOCAR 2000: Rules and Regulations Draft Version 1.0 (1999) SAE International • Experimental High Performance Two Stroke Piston Design (1997) John Yestrau • Five Speed Manual Transmission for the Mini Baja Vehicle (1998) F. Sison & C. Riddell • Formula SAE Body Design Project (1997) D. Riley & C. Mackie • Formula SAE Drive Line Design Differential Design (1997) I. Maclean, R. Ferguson, T. Skilnick • Fuel Injection and Carburetion (1995) D. Perron • IDV Rinal Report (1986) • Mini Baja Differential (1997) C. Novakowski, M. Enns, V. Baquiran, R. Morrison • Modifying the Timing System of a Briggs & Straton 2HP Engine to be Converted to a K-Cycle Engine (1989) R.B. Izzard • Moulded Seat for FSAE Car (1997) K. Andrew, C. St. Amant, R. Penner • Performance Prediction Program for the SAE Cargo Aircraft (1993) K. Macdonald • SAE Formula Car Steering System (1997) B. Mckay & J. van Solkema • SAE Mini Baja Frame Design A. Ringor & Lulzim Osmani • SAE Mini Baja Vehicle Drive Train M. Coss, B. Reimer, & C. Riddell • SMV Report(1994) V. Buracynsky • Spindle and Ball Joint Unit (Upright) for FSAE (1995) Kevin Wong • Structure & Analysis of Formula SAE Frame (1998) J. Cutts, C. Novakowski, M. Reimer, R. Ward • Supermileage Vehicle Drivetrain (1997) B. Bretecher, B. Dhaliwal, I. Harder • SuperMileage Vehicle (SMV) Engine Design Report (1995) G. Cadieux, R. Lyons, & J. Paulmark • The 1994 U of M Formula SAE Competition Vehicle Frame Design (1994) D. Jaremowich • The 1997 U of M Forumla SAE Competition Vehicle Frame Design (1994) A. Pauch & M. Coss • The Use of Fiber Composite Materials in the Construction of the 1992 U of M SMV (1992) D. Musil • UMSAE S1223 Wind Tunnel Data Gathering October 1998 (1999) M. Hudek & Air Cargo Team • University of Manitoba International Competitions Trailer Design (1998) K. Gillis, C. Hildebrand, J. Lusk, D. Siepman • Wind Tunnel Testing of a CL-125 Airfoil G. Atamanchuk, K. Ferguson, M. Hudek, M. Shead, B. Soriano, K. Weiss-Bundy • Wind Tunnel Testing of the Hilift-5 Airfoil for the SAE Air Cargo (1998) D. Zubert |
| Manuals |
• An Updated Plotting Program Compatible with Existing Gait Software (1985) E. Guest • Data Management Program for the Force Plate System (1992) Kohji Suzuki • Four-Fit Fourier Analysis and Filtering Routine (1991) K. Suzuki • Force Plate System Operation Manual (1991) D. Hiquebran • HTML For the World Wide Web (1998) E. Castro • Instruction Manual for the Qualysis 3D Camera System (1998) R. Jensen • Manual for Spills of Hazardous Materials (1984) Environment Canada • Model ACB2 Reference Manual (1992) Optikon Corp. Ltd. • Radian's CHARM Systems Radian Corporation • TK Solver for Windows: Student Manual (1995) R.J. Ferguson • User's Guide to the Force Plate (1985) R. Manning |
| Misc. Documents |
• A Boundary Element Formulation for Elastostatics W.N. Aitken & A.T. Dolovich • A Computer Algorithim to Model the Dynamics of Human Motion as a Three Dimensional Five Link Mechanism (1986) G. Johnson • A Five Link Model of the Body Used to Calaculate Joint forces and Torques from Cinematography and Force Board Analysis • A Full Configuration Model for Tethered Twp Spin Satellite Systems (1997) Da Ming Xu • A Generalized Process Planning Model Based on Genetic Algorithms (Candidacy Report) B. Awadh • A Kinematic Anlysis of Accelerating Giant Swings on the Horizontal Bar: Thesis Proposal (1982) P. Thiessen • A Particle-in-cell Method for Numerical Solution of the Atmospheric Diffusion Equation, and Applications to Air Pollution Problems(1971) R. Sklarew, A. Fabrick, J. Prager • A Study of Antenna Concepts and Trade-Offs for Portable Earth Stations: Final Report (1978) W. Goddard, E. Bridges, A.B. Thornton-Trump • A Summary of Work on Ocular Pulse Monitoring and Processing (1983) M. Jullian • An Evaporation/Air Dispersion Model for Chemical Spills on Land (1980) M. Fleischer • Atmospheric and Geophysical Sciences Division: Program Report (1977) J.B. Knox & R.C. Orphan • Atmospheric Diffusion: The Dispersion of Windborne Material from Industrial and Other Sources (1974) F. Pasquill • Atmospheric Diffusion of Droplet Clouds (1984) J. Aroesty • Atmospheric Diffusion Models • Atmospheric Dispersion Models • CSME Transactions Vol. 15, No. 2 (1991) • Data Acquisition with a Tecmar A/D Board G. Sims • Deep Water Blowout Trajectory Models for the Lancaster Sound Region (1982) Environment Canada • Evaporation and Disperson of Hazardous Materials: Final Report (1978) C. Springer • Fourier Analysis and the Discrete Fourier Transform • Gait Anlysis Dr. A.B. Thornton-Trump • Mean Value Analysis of a Close Queueing Network Model for a Flexible Manufacturing System (1984) V. Kumar, O. Hawaleshka, & J. Kapur • Meteorology and Atomic Energy (1968) D. Slade • Methodology for Chemical Hazard Prediction (1974) M. Johnson • Micrometeorology (1953) O. G. Sutton • Optimizing Performance of Flexible Manufacturing Systems (Ph.D. Candidacy Proposal) (1984) V. Kumar • Overview of US Research Activiites in the Dispersion of Dense Gases (1979) D.J. McNaughton & C.M. Berkowitz • Plume Rise (1969) G.A. Briggs • Predictability of LNG Vapor Disperson from Catastophic Spills onto Water (1977) J. Havens • Probably Behaviour and Fate of a Winter Oil Spill in the Beaufort Sea (1977) Fisheries and Environment Canada • Review of Atmospheric Diffusion Models for Regulatory Applications (1982) World Meteorological Organization • Scientia Iranica Vol. 3, No. 1,2,3 (Fall 1996) International Journal of Science & Technology • Slip Resistance in Normal Walking (1983) Dr. A.B. Thornton-Trump • Stress Distribution Around an Elliptical Hole (1982) L.G. Zaplin • Testing and Stress Analysis of Condoms (1982) Dr. J.R. Cahoon & Dr. A.B. Thornton-Trump • Testing and Stress Analysis of Contraceptive Devices (Condoms) (1980) Dr. J.R. Cahoon & Dr. A.B. Thornton-Trump • Tether Material Property Investigation D.M. Xu, G. Tyc, R.P.S. Han and A.B. Thornton-Trump • The Bulk Distribution of Toxic Substances: A Safety Assessment of the Carriage of Liquid Chlorine G. Westbrook • The State of the Techniques Development Laboratory's Boundary Layer Model (1977) P. Long, W. Shaffor, J. Kemper, F. Hicks • Turbulent Diffusion in the Environment (1984) G.T. Csandy • Workbook of Atmospheric Dispersion Estimates (1970) B. Turner |